Epson LQ-1050X User Manual page 225

Problem
Printed characters
are not what you
expected.
The typestyle or
characters that are set
by the software cannot
be printed.
font
The wrong
printed.
italic characters are
of
printed instead
selected graphic "line"
characters.
Troubleshooting
7-8
Solution
The software may not be correctly
installed for your printer. Use the
program's setup (or install) procedure to
check the printer settings, and reset as
needed.
is Check your software manual, Chapter 3,
or Chapter 9 for information on using
fonts.
The wrong character table is selected. If
your application program is capable of
the
sending control codes, specify the Epson
Extended Graphics character table using
ESC t 1. See Chapter 9.
You can also select the graphics character
table by changing a DIP switch setting. To
do this, turn off the power, set DIP switch
1-4 to on, then turn on the printer. See
Chapter 3.