Epson LQ-1050X User Manual page 294

ESC k
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
This command affects only the Letter Quality typestyle, not draft.
If n = 0, the Roman typestyle in the printer is used. To select one
of the other typestyles, use the family number of the font as
shown below. For example, to choose the Prestige font, use 3 for
the value of n. The following values can be used for n:
0: Roman
1: Sans Serif
2: Courier
3: Prestige
4: Script
Overrides the SelecType panel setting.
ESC !
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Selects any valid combination of the following modes: 10 cpi, 12
cpi, proportional, condensed, emphasized, double-strike, double-
wide, italic, and underline. For details on how to set n, see
Selecting Typestyles With Master Select in Chapter 4.
ESC k
27 107
1B 6B
5: OCR-B
6: OCR-A
7: Orator
8: Orator-S
ESC !
27 33
1B 21
Select Typestyle Family
n
n
n
n
n
n
Command Summary
Master Select
9-23