Epson LQ-1050X User Manual page 125

For example, to print a title you may want to use double-wide 12 cpi
characters printed in the double-strike mode. You would add three
numbers together to calculate the value of n.
12cpi
Double-strike 16
Double-wide
n = 49
After calculating the value of n, you use the Master Select command
to send the value to the printer.
ASCII:
Decimal:
Hexadecimal:
The print quality and font must be set separately, using SelecType
or the ESC x and ESC k commands. There are two more things to
consider when using the Master Select command:
Master Select cancels any of the other listed features that you do
l
not set. For example, if you have already set a different character
width and you use Master Select to set emphasized double-
strike, the character width is reset to 10 cpi.
Proportional spacing overrides 10, 12, and 15 cpi.
l
1
32
ESC !
27 33
1B 21
1
49
31
Software and Graphics
4-9