Epson LQ-1050X User Manual page 128

closely at a newspaper photograph, you will find that it is made up
of thousands of small dots. Your printer also forms its images with
patterns of dots, as many as 360 dots per inch, horizontally and 360
dots per inch, vertically. The images printed by this printer can,
therefore, be as finely detailed as the ones at the beginning of this
section.
Twenty-four-pin graphics
The graphics mode that takes full advantage of this printer's print
head is 24-pin graphics. This mode has five densities, but for
simplicity this explanation deals with only one of them, triple-
density.
Triple-density prints up to 180 dots per inch, horizontally. As the
print head moves across the paper, every 1/180th of an inch it must
receive instructions about which of its 24 pins to fire. At each
position it can fire any number of pins, from none to 24. This means
that the printer must receive 24 bits of information for each column
it prints. Since the printer uses 8-bit bytes of information in
communicating with the computer, it needs three bytes of
information for each position.
Software and Graphics
4-12