5. Raise the paper path guide until it clicks open. This guide directs
the flow of continuous paper out of the front of the printer.
6. Press the LOAD/EJECT button to load continuous paper.
Note: With the paper release lever forward and the printer off
line, the control panel functions normally, allowing you to use the
micro-adjustment feature to finely adjust the loading position of
your paper.
CAUTION: Never attempt to print on labels when the cut
sheet feeder is installed.
To switch back to using the cut sheet feeder, follow these steps:
1. Tear off all printed sheets. Press the LOAD/EJECT button until the
continuous paper feeds backward out of the paper path.
Using the Printer Options
5-21