Epson LQ-1050X User Manual page 74

Note: For normal use, set the paper thickness lever to position 2
on the scale.
If you have installed the optional film ribbon cartridge, and you
want to use the single sheets or continuous paper, set the paper
thickness lever to position 1.
The following table gives you general guidelines for selecting the
right paper thickness lever position for the type of paper you are
using:
Paper type
Paper (single sheets or continuous
paper with film ribbon installed)
Thin paper
Paper (single sheets or continuous
paper with standard ribbon installed)
24 lb paper (single sheets)
Multi-part forms
2-sheet
3-sheet
4-sheet
Labels
Envelopes
Air mail
Plain
Bond (20 lb.)
Bond (24 lb.)
Note:
If the lever is set to position 4 or higher, the printing speed is reduced.
Paper Handling
2-26
Lever position
1
or
2 1
2
3
3
4
5
4
4 or 5
6
6
7