Using Micro-Adjustment - Epson ActionPrinter 4000 User Manual

Using Micro-adjustment

1. Make sure that the printer is turned on and that either a single
sheet or continuous paper is ready to be loaded.
LOAD/EJECT
2. Press the
position. Then press the
begins to blink.
Note: You can use the
micro-adjustment only while the
3. FORM FEED
Press the
LINE FEED
Note: When the paper reaches the factory-set loading
position, the printer beeps and micro-adjustment feeding
pauses for a moment before continuing. You can use this
factory setting as a reference point when adjusting the
printer's loading position. When the paper reaches either the
minimum or maximum top margin, the printer beeps and the
paper stops moving.
button to feed paper to the loading
ON LINE
PART
FORM FEED
button to feed the paper forward or the
button to feed the paper backward.
Adjusting the Loading Position
MULTI-PART
button; the
LINE FEED
and
MULTI-PART
Using the Printer
light
buttons for
light is blinking.
3-13