AMD XILINX VCK190 User Manual page 8

2. Choose the correct SD card under device.
3. Click Write and then Yes at the prompt and wait until the operation is complete.
Using the command line utility for Linux:
1. Unzip the image file petalinux-sdimage.wic.zip:
unzip petalinux-sdimage.wic.zip
2. Use dd to write sdcard.img to the correct enumerated disk for the SD card (check output of
mount command to know sdxx mount point) in the Linux machine:
sudo dd if=petalinux-sdimage.wic.zip of=/dev/sdbx bs=1M
Micro SD Card Partitions
After the raw image is written to the SD card, there will be two partitions. The first partition
(FAT32 format) contains:
• boot image (BOOT.bin)
• u-boot script (boot.scr)
• kernel image (Image)
The second partition (ext4 format) contains the root file system.
UG1573 (v1.0) February 22, 2023
System Controller User Guide
Chapter 3: Installing the System Controller Image
Send Feedback
www.xilinx.com
8