AMD XILINX VCK190 User Manual page 22

In addition, four tabs at the top of the page provide the following features:
• Use Default Calibration gathers power information based on default INA226 calibration data.
The default INA226 data can be obtained by selecting Get INA226 Registers after a power
cycle.
• The default data can be changed using Set INA226 Registers.
• Use Custom Calibration reads power information based on the custom settings set with Set
INA226 Registers.
DDR DIMM
DDR DIMM provides information about type and size of the DIMM, and whether there is a
temperature sensor on the DIMM. You can view both the DIMM information and temperature in
degree Celsius simultaneously, or individually. During the operation, the following status is
indicated:
• A loader symbol is displayed under the Status column.
• On success, a green tick appears.
• On failure, a red color cross icon is displayed. Hover the mouse cursor on the red colored cross
icon to see the error message.
UG1573 (v1.0) February 22, 2023
System Controller User Guide
Figure 14: Power/Use Default Calibration Page
Chapter 5: Using the BEAM Tool
www.xilinx.com
Send Feedback
22