AMD XILINX VCK190 User Manual page 29

FMC
FMC provides options for Current and Boot-Up operations. During each operation, the following
status is indicated:
• A loader symbol is displayed under the Status column.
• On success, a green tick appears.
• On failure, a red color cross icon is displayed. Hover the mouse curser on the red colored cross
icon to see the error message.
Current
Current displays the voltage names (Get VADJ_FMC and Set VADJ_FMC). You can Run All, Get
(display) or Set the voltage by means of a pull down menu.
UG1573 (v1.0) February 22, 2023
System Controller User Guide
Figure 22: EBM Data Page
Chapter 5: Using the BEAM Tool
www.xilinx.com
Send Feedback
29