AMD XILINX VCK190 User Manual page 21

Power
Power displays default calibration rail names, power (W), voltage (V), and current (A). You can
view all rail values simultaneously, or individually. During the operation, the following status is
indicated:
• A loader symbol is displayed under the Status column.
• On success, a green tick appears.
• On failure, a red color cross icon is displayed. Hover the mouse cursor on the red colored cross
icon to see the error message.
UG1573 (v1.0) February 22, 2023
System Controller User Guide
Figure 13: Voltage Page
Chapter 5: Using the BEAM Tool
www.xilinx.com
Send Feedback
21