Fuse - Komatsu ecot3 WA430-6 Operation & Maintenance Manual

OPERATION

FUSE

NOTICE
Before replacing a fuse, be sure to turn off the starting switch.
The fuses protect the electrical equipment and wiring from burning out.
If the fuse becomes corroded, or white powder can be seen, or the fuse is loose in the fuse holder, replace the fuse.
Replace the fuse with another of the same capacity.
Inside rear console box
Loosen knob (1) at two places, then remove cover (2). The fuse
boxes are A and B.
FUSE CAPACITY AND NAME OF CIRCUIT
FUSE BOX A
Fuse
No.
capacity
(1) 10A Left front lamp
(2) 10A Right front lamp
(3) 10A Left clearance lamp
(4) 10A Right clearance lamp
(5) 20A Main lamp circuit
Instrument panel B
(6) 10A
Load meter printer (if equipped)
(7) 5A Air conditioner B (if equipped)
(8) 20A Air conditioner A (if equipped)
(9) 20A Wiper, washer
(10) 10A Backup lamp, brake lamp
Work equipment positioner,
(11) 10A Work equipment controller A
(if equipped)
(12) 5A Emergency steering (if equipped)
(13) 5A Parking brake
(14) 10A Transmission control A
(15) 10A Horn
Name of circuit
EXPLANATION OF COMPONENTS
3 - 67