Komatsu ecot3 WA430-6 Operation & Maintenance Manual page 90

OPERATION
RESET METHOD FOR FILTER, OIL REPLACEMENT TIME
The filter and oil replacement time is displayed on the character display, so if the filter and oil have been replaced,
reset the filter and oil change time.
1. Press the ( ) of machine monitor mode selector switch 1, and display the odometer.
2. Press (>) or (<) of machine monitor mode selector switch 2 and
display "MAINTENANCE MONITOR".
3. Press the ( ) of machine monitor mode selector switch 1. It
will change to the display in the diagram on the right.
The bottom line shows two items: the replacement time on the
left and the total number of times the item has been replaced
on the right.
4. Press the (>) or (<) of machine monitor mode selector switch 2
to display the item (filter or oil) which has reached the
replacement time.
5. Press the ( ) of machine monitor mode selector switch 1. It
will change to the display in the diagram on the right.
The top line shows [Reset] and [Item to be reset] in turn.
6. When resetting the replacement time, press (>) or (<) of
machine monitor mode selector switch 2, align the cursor with
"YES", then press ( ) of machine monitor mode selector
switch 1. It will reset and return to the previous screen.
To abort, align the cursor with "NO", then press ( ) of machine
monitor mode selector switch 1.
7. When resetting the replacement time for another item, use the procedure in Step 4. After completing, press (
) of machine monitor mode selector switch 1 twice or turn the starting switch OFF.
EXPLANATION OF COMPONENTS
3 - 33