Engine Oil Filter Replacement - KYMCO X-Town CT125 Owner's Manual

Engine oil filter replacement(Only for X-
Town CT125)
Screw the oil level dipstick off the crankcase.
●
Place an oil container beneath the oil filter cap.
●
Unscrew the bolts to remove the oil filter cap.
●
Take out the O-ring, spring and filter.
●
Replace the oil filter with a new one and notice the
●
grommet seal is towards the inside.
Replace the O-ring with a new one.
●
Apply thin layer of engine oil over the O-ring.
●
Install the spring and put on the oil filter cap.
●
Tighten the bolts to the specified torque.
●
CAUTION
Use the genuine oil filter or another with the
same quality and grade to avoid burnout on
the engine parts.
CAUTION
An adverse installation of oil filter causes a
failure on oil circulation which will damage
the engine.
MAINTENANCE
Oil filter
Spring
O-ring
39