KYMCO X-Town CT125 Owner's Manual page 18

Adjust clock
The setting procedure:
1.Turn the ignition switch to the ON position.
2.Push the MODE button for more than 2
seconds to select the ODO mode.
▆
NOTE: The d igital clock can be only
adjusted in ODO mode.
3.Push the MODE button for more than 2
seconds. The "hour" digits will be flashing
and the hour can be adjusted at that
moment.
4.Push the RESET button to set the hour.
14
CONTROLS & FEATURES
5. Push the MODE button; It will change to
make the "minute" digits be flashing.
6.Push the RESET button to set the minute.
7.Push both the MODE and RESET buttons
at the same time to finish the clock setting.
▆
NOTE:
The adjustment will be cancelled if any
button is not pressed within approximately ten
seconds.
▆
NOTE:
The clock will be reset to 12:00 when the
battery is disconnected.