Group 1 Introduction Guide - Hyundai R480LC-9S Service Manual

SECTION 9 COMPONENT MOUNTING TORQUE SECTION 9 COMPONENT MOUNTING TORQUE

GROUP 1 INTRODUCTION GUIDE

GROUP 1 INTRODUCTION GUIDE
1. This section shows bolt specifications and
standard torque values needed when
mounting components to the machine.
2. Use genuine Hyundai spare parts.
We expressly point out that Hyundai will not
accept any responsibility for defects resulted
from non-genuine parts.
In such cases Hyundai cannot assume
liability for any damage.
Only metric fasteners can be used and
incorrect fasteners may result in machine
damage or malfunction.
Before installation, clean all the compone-nts
with a non-corrosive cleaner. Bolts and
threads must not be worn or damaged.
9-1
29079CM00