GROUP 1 BEFORE TROUBLESHOOTING
GROUP 1 BEFORE TROUBLESHOOTING
1. INTRODUCTION
1. INTRODUCTION
When a trouble is occurred in the machine, this section will help an operator to maintain the machine
with easy.
The trouble of machine is parted Hydraulic & Mechanical system, Electrical system and
Mechatronics system. At each system part, an operator can check the machine according to the
troubleshooting process diagram.
※
Before carring out troubleshooting procedure, check monitoring menu in the cluster.
Before carring out troubleshooting procedure, check monitoring menu in the cluster.
Hydraulic &
Mechanical part
Electrical part
Mechatronics
Troubles occur
part
Fault codes
displayed on
monitor display
SECTION 6 TROUBLESHOOTING
SECTION 6 TROUBLESHOOTING
Cluster type 1
HCESPN 3digit
+ FMI 1 digit
(machine)
Cluster type 2
2 digit
(machine)
3 or 4 digit
(engine)
6-1
GROUP 2
GROUP 3
GROUP 4
See page
5-26
See page
5-28-1
See page
5-29