Group 1 Outline - Hyundai R480LC-9S Service Manual

GROUP 1 OUTLINE (CLUSTER TYPE 1)

GROUP 1 OUTLINE

The CAPO (Computer Aided Power Optimization) system controls engine and pump mutual power at
an optimum and less fuel consuming state for the selected work by mode selection, auto-deceleration,
power boost function, etc. It monitors machine conditions, for instance, engine speed, coolant
temperature, hydraulic oil temperature, and hydraulic oil pressure, etc.
It consists of a MCU, a cluster, an ECM, EPPR valves, and other components. The MCU and the
cluster protect themselves from over-current and high voltage input, and diagnose malfunctions caused
by short or open circuit in electric system, and display error codes on the cluster.
Mode selection system
Auto deceleration system
Power boost system
Travel speed control system
Automatic warming up system
Engine overheat prevention system
NEW CAPO
SYSTEM
Variable power control system
Attachment flow control system
Anti-restart system
Self-diagnostic system
Machine monitoring system
One touch deceleration system
SECTION 5 MECHATRONICS SYSTEM SECTION 5 MECHATRONICS SYSTEM
5-1
Power mode selection (P, S, E)
Work mode selection
User mode system (U)
MCU & cluster protection
Open-short diagnosis & error code display
Machine error & ECM fault code display
Machine condition monitoring
Electric signal monitoring