Group 1 Operational Performance Test - Hyundai R480LC-9S Service Manual

GROUP 1 OPERATIONAL PERFORMANCE TEST

GROUP 1 OPERATIONAL PERFORMANCE TEST
1. PURPOSE 1. PURPOSE
Performance tests are used to check:
OPERATIONAL PERFORMANCE OF A OPERATIONAL PERFORMANCE OF A
1) 1)
NEW MACHINE NEW MACHINE
Whenever a new machine is delivered in
parts and reassembled at a customer's
site, it must be tested to confirm that the
operational performance of the machine
meets Hyundai spec.
OPERATIONAL PERFORMANCE OF A OPERATIONAL PERFORMANCE OF A
2) 2)
WORKING MACHINE WORKING MACHINE
With the passage of time, the machine's
operational performance deteriorates, so
that the machine needs to be serviced
periodically to restore it to its original
performance level.
Before servicing the machine, conduct
performance tests to check the extent of
deterioration, and to decide what kind of
service needs to be done (by referring to
the "Service Limits" in this manual).
OPERATIONAL PERFORMANCE OF A OPERATIONAL PERFORMANCE OF A
3) 3)
REPAIRED MACHINE REPAIRED MACHINE
After the machine is repaired or serviced, it
must be tested to confir m that its
operational performance was restored by
the repair and/or service work done.
SECTION 7 MAINTENANCE STANDARD
7-1
Working
condition
Operating
Maintenance
record
21077MS01