SECTION 5 – MAINTENANCE SCHEDULE AND SERVICE PROCEDURES
Service Procedures (cont.)
BELT, AIR INTAKE PIPING AND CLAMPS
Service Interval: 10,000 miles (16,000 km), 6 months, 350 hours
or 1000 gallons (3785 liters of fuel)
Figure 33 Cracks In Belt Ribs
1.
Belt in good condition
2.
Belt ready for replacement
3.
Belt ribs
4.
Cracks in belt
Install a new belt if any of the following conditions exist:
•
Excessive wear
•
Missing material
•
Grease or oil contamination
•
Over three cracks per inch in a belt rib
Page 77