Inlet And Exhaust System; Filling Adblue®/Def - Volvo Penta TAD1381VE Operator's Manual

13l
Table of Contents

Advertisement

47713625 06-2021 © AB VOLVO PENTA
9 Fill up with Volvo Penta recommended coolant,
following the instructions in the chapters entitled
Maintenance, page 61 and Coolant Level,
Checking and Topping Up, page 62.

Inlet and Exhaust System

Filling AdBlue®/DEF
CAUTION!
®
AdBlue
/DEF spilt onto hot components will quickly
vaporize. Turn your face away!
CAUTION!
Risk of corrosive damage.
Contact with the fluid can cause irritation and
corrosion.
Wear protective gloves!
Change gloves and clothing that have been in contact
with the liquid.
CAUTION!
Risk of material damage.
AdBlue®/DEF oxidises metal and the capillary action
creeps through lines at a speed of approx. 0.6 metres
per hour.
If spillage occurs, electrical connectors must be
replaced immediately. Do not try to clean with water or
compressed air.
IMPORTANT:
Dirt/dust, oil, greases, detergents and any chemicals
and natural products must be prevented from entering
the Adblue/DEF tank.
The system will be damaged if dust or dirt enters the
tank clogging the filters in the dosing system.
Keep the tank clean at all times.
IMPORTANT:
Never start the engine if anything other than clean
AdBlue®/DEF has been added to the tank.
IMPORTANT:
The use of solution that do not fulfill the ISO 22241
standard will compromise the aftertreatment system
performance, increase emissions.
Any warranty claims will be rejected.
Maintenance
65

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tad1382veTad1383veTad1384veTad1385ve

Table of Contents