Eats Warnings And Inducements; Warning Symbols - Volvo Penta TAD1381VE Operator's Manual

Fault handling
NCD symbol
40
EATS Warnings and
Inducements
EATS system monitoring checks the quality of the
AdBlue®/DEF, the level in the tank and the correct
function of the system components. If a fault is
detected, the operator is warned via the instrument
panel and the engine speed and torque is limited. To
enable fault tracing and the remedy of any faults, the
engine can be re-started according to a start schedule;
refer to EATS Inducements, VE-engines
(EU), page 44.
NOTICE! Warning messages and symbols may vary
depending on the installation; shown here are those
seen on panels sold by Volvo Penta.
Important! Take prompt action in case of error code
indication

Warning Symbols

NCD - NOx Control Diagnostics
The NCD symbol will be shown if the reagent level is
below 15%, the quality of the reagent is bad or if the
dosing activity is un-normal. If no action has been
taken to resolve the EATS malfunctions or refill the
tank within certain time, the engine will be derated
(applicable for VE engines). For genset the engine will
be shut down according to inducement settings.
VE engines: The operator has the possibility to
override the derate if the power reduction makes the
application stuck in an unsuitable situation. An urgent
repair or maintenance of the EATS system has to be
performed when the combination of NCD symbol and
yellow/red warning indicator are lit/flashing.
Light inducement
• The warning symbol shines with a
solid yellow light.
P0002361
• The NCD symbol shines with a solid
light.
Severe inducement
• The warning symbol shines with a
P0002361
solid red light.
• The NCD symbol flashes.
47713625 06-2021 © AB VOLVO PENTA