Error Messages - Epson Aculaser CX28DN Series User Manual

This message...
PRINT WAITING
PRINTING
SEARCHING
SCANNING
Warming Up

Error Messages

This message...
2-SIDED SCAN SETTING
SET ORIGINAL TO ADFR
ADDRESS IS TOO LONG
CANNOT CONNECT
xxx Server
CANNOT GET IP
xxx Server
PC CONNECTION FAILED
Status, Error, and Service Messages
means...
The machine is waiting to
print.
The machine is printing.
The machine is searching
data.
The machine is scanning
the document.
The machine is warming up
or AIDC is being per-
formed.
means...
The document is not
loaded into the ADF
while duplex (dou-
ble-sided) scanning
is set.
The e-mail address
retrieved from the
LDAP server
exceeds 64 charac-
ters.
A connection with
the specified server
could not be estab-
lished.
The IP address of
the specified server
could not be
obtained from the
DNS server.
While data was
being sent in Scan
mode, the connec-
tion to the computer
was interrupted.
Do this...
Do this...
Load the document
into ADF.
This machine can han-
dle addresses contain-
ing no more than 64
bytes. Use a shorter
address.
Check the settings in
the NETWORK SET-
TING menu, and then
try connecting again.
Check the settings in
the NETWORK SET-
TING menu, and then
try sending the data
again.
Check the connection
with the computer and
the scanner driver sta-
tus, and then try send-
ing the data again.
255