Registering Address Destinations (Ldap Search) - Epson Aculaser CX28DN Series User Manual

A maximum of 64 characters can be entered.

Registering Address Destinations (LDAP Search)

E-mail addresses can be registered as address destinations by using infor-
mation on the LDAP server. A maximum of 250 address destinations can be
registered.
To connect to an LDAP server, settings for
specified. For details, refer to the Reference Guide on the software
CD-ROM.
Machine key operations cannot be used to register an FTP address or
SMB address as an address destination. These addresses can be
registered with Web-based EpsonNet config. For details, refer to the
Reference Guide on the software CD-ROM.
Address destination numbers 221 to 250 are reserved for registering
FTP addresses and SMB address from Web-based EpsonNet config.
1
In the main screen (Scan mode), press the + or , key to select
ITY
, and then press the Select key.
2
Press the + or , key to select
the Select key.
3
Press the + or , key to select
4
Use the keypad to type in the number (between 1 and 220) for the
address destination, and then press the Select key.
5
Press the + or , key to select
Select key.
If an LDAP server is not specified,
appear.
6
Press the + or , key to select
Select key.
To search registered names, select
addresses, select
7
Use the keypad to type in the search keyword (maximum of 10 charac-
ters), and then press the Select key.
The search begins, and the search results appear after a while. If no data
matches the search keyword,
onds.
For details on entering/editing text, refer to "Entering Text" on page
283.
Scanning With the Machine
ADDRESS REGISTER
ADDRESS
, and then press the Select key.
LDAP SEARCH
LDAP SEARCH
NAME E-MAIL
or
NAME
E-MAIL
.
NOT FOUND
LDAP SETTING
, and then press
, and then press the
does not
, and then press the
. To search e-mail
appears for about two sec-
must be
UTIL-
171