Epson Aculaser CX28DN Series User Manual page 55

E-MAIL
SETTING
Configuration Menu Overview
IEEE802.1X
SMTP
SENDER NAME
E-MAIL ADDRESS
DEFAULT SUB-
JECT
SMTP SERVER
ADDR.
SMTP PORT NO.
SMTP TIMEOUT
TEXT INSERT
DISABLE
Setting
Select whether or not to enable
IEEE802.1X.
DISABLE
Setting
Select whether to enable or disable
e-mail transmission operations for this
machine.
Specify the name of the E-mail sender
(up to 20 characters) used for network
scanning.
The default setting is "EPSON
AL-CX28".
Specify the E-mail address (up to 64
characters) of the E-mail sender used
for network scanning.
Specify the subject (up to 20 characters)
of the E-mail message used for network
scanning.
The default setting is "from EPSON
AL-CX28".
Specify the IP address or host name (up
to 64 characters) for the SMTP server.
The default setting is "0.0.0.0".
1 65535
Setting
to
Specify the port number communicating
with the SMTP server.
30
Setting
to
60 sec
Select the amount of time (in seconds)
until the connection with the SMTP
server times out.
OFF
Setting
Select whether or not the specified text
is inserted into the E-mail message.
ENABLE
/
ENABLE
/
25
(Default:
300 sec
(Default:
)
ON
/
)
43