This message...
TONER EMPTY
CHANGE x TONER
Toner Low x
Trans. Belt Life
Trans. Roll. Life
TRAYx OPEN
CLOSE TRAYx
UNABLE TO
COLLATE JOB
USB Dev. Not support
Status, Error, and Service Messages
means...
The indicated toner
cartridge has
become empty.
(This message
TONER
appears if
EMPTY
on the
MACHINE SET-
TING menu is set to
STOP.)
The indicated toner
cartridge is low and
should be replaced
within 200 pages at
5% coverage of Let-
ter/A4 paper.
The time to replace
the transfer belt unit
has been reached.
The time to replace
the transfer roller
has been reached.
The indicated paper
tray is open.
Since the hard disk
(area for saving
copies when print-
ing sets) is full, cop-
ies cannot be
printed as sets.
A USB device
incompatible with
this machine is con-
nected.
Do this...
Replace the indicated
toner cartridge.
Prepare the indicated
toner cartridge.
Replace the transfer
belt unit.
Contact a qualified ser-
vice representative.
Replace the transfer
roller.
Contact a qualified ser-
vice representative.
Close the indicated
paper tray.
Print only one set at a
time, or reduce the
number of pages to be
printed.
Disconnect the USB
device from this
machine.
261