Table of Contents
Advertisement
This message...
xxx IS DISABLED
DESTINATION SET
BY MANUAL UP TO 16
Service Messages
These messages indicate a more serious fault that can only be corrected by a
customer service engineer. If one of these messages appears, turn the
machine off, then turn it on again. If the problem persists, contact your local
vendor or authorized service provider.
This service message...
MACHINE TROUBLE
SERVICE CALL (xxxx)
Status, Error, and Service Messages
means...
The TCP/IP, FTP,
SMTP or SMB set-
tings are disabled.
There were more
than 16 addresses
found with an LDAP
search.
means...
An error has been
detected with the item
xxxx
indicated "
" in
the service message.
Do this...
Enable the TCP/IP,
FTP, SMTP or SMB
settings.
Increase the number of
entered characters,
and then perform the
search again.
Do this...
Reboot the machine.
This often clears the
service message,
and machine opera-
tion can resume.
If the problem per-
sists, contact Techni-
cal Support.
263
Advertisement
Table of Contents
