Editing/Deleting Address Destinations - Epson Aculaser CX28DN Series User Manual

Editing/Deleting Address Destinations

Information registered as an address destination can be edited or deleted.
Machine key operations cannot be used to edit/delete an FTP address
or SMB address registered as an address destination. These
addresses can be edited/deleted with Web-based EpsonNet config.
For details, refer to the Reference Guide on the software CD-ROM.
1
In the main screen (Scan mode), press the + or , key to select
ITY
, and then press the Select key.
2
Press the + or , key to select
the Select key.
3
Press the + or , key to select
4
Use the keypad to type in the number (between 1 and 220) for the
address destination to be edited/deleted, and then press the Select key.
The information currently registered for the address destination appears
for two seconds.
5
Press the + or , key to select
delete the destination, and then press the Select key.
DELETE
If
REGISTER
6
Use the keypad to edit the registration name, and then press the Select
key.
7
Use the keypad to edit the e-mail address, and then press the Select key.
The edited settings are saved, and the
appears again.
Scanning With the Machine
was selected, the settings are deleted, and the
menu appears again.
For details on entering/editing text, refer to "Entering Text" on page
283.
If the edited address destination is registered in the favorite list or
with a group destination, a confirmation message asking whether
or not to keep the destination registered as it is appears after the
operation in step 7 is performed. To keep the destination regis-
tered as it is, select
ADDRESS REGISTER
ADDRESS
, and then press the Select key.
EDIT
to edit information or
ADDRESS REGISTER
Yes
. To cancel the registration, select
UTIL-
, and then press
DELETE
to
ADDRESS
menu
No
.
173