Table of Contents
Advertisement
EPSON AcuLaser C3800
Bonjour (Rendezvous)
Select your printer, the printer name is followed by (PostScript), from the Name List.
Your printer model is automatically selected in the Printer Model List.
Note for USB (for Mac OS X 10.2) or Bonjour (Rendezvous) users:
If your printer model is not automatically selected in the Printer Model list, you need to reinstall
the PostScript printer driver. See "Installing the PostScript printer driver" on page 156.
5. Click Add.
Note for IP Printing users, USB or Bonjour (Rendezvous) users:
Select your printer from the Printer list, then select Show Info from the Printers menu. The
Printer Info dialog box appears. Select Installable Options from the pop-up list, then make the
necessary settings.
6. Confirm that your printer's name is added to the Printer List. Then quit Printer Setup
Utility (for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS X 10.2).
For Mac OS 9 users
Follow the steps below to select the printer.
1. Select Chooser from the Apple menu.
2. Make sure that AppleTalk is active.
3. Click the AdobePS icon and select the network to be used in the AppleTalk Zone box.
Your printer appears in the Select a PostScript Printer box.
Note:
By default, the six-digit MAC address is displayed after the printer name if the printer is
connected through an optional network card. Refer to your network card manual for details.
4. Click your printer. The Create button appears.
Note:
If your computer is connected to more than one AppleTalk zone, click the AppleTalk zone your
printer is connected to in the AppleTalk Zones list.
5. Click Create.
Accessing the PostScript printer driver
To control your printer and change its settings, use the printer driver. The printer driver
allows you to easily make all the print settings, including paper source, paper size, and
orientation.
User's Guide
Using the PostScript Printer Driver
160
Advertisement
Table of Contents
