Thick Paper And Extra Thick Paper - Epson AcuLaser C3800N Series User Manual

EPSON AcuLaser C3800
When loading labels, you should make paper settings as shown below:
❏ Make settings on the Basic Settings in the printer driver.
Paper Size:
Paper Source:
Paper Type:
❏ You can also make these settings on the Tray Menu in the control panel. See "Tray
Menu" on page 172.
Note:
❏ You should only use labels designed for laser printers or plain-paper copiers.
❏ To prevent the label adhesive from coming into contact with printer parts, always use labels that
completely cover the backing sheet, with no gaps between the individual labels.
❏ Press a sheet of paper on top of each sheet of labels. If the paper sticks, do not use those labels
in your printer.
❏ You may have to make the setting Thick* for Paper Type in the Setup Menu.
* When using especially thick labels, set Paper Type to ExtraThk.

Thick paper and extra thick paper

You can load thick paper (106 to 163 g/m²) or extra thick paper (164 to 216 g/m²) into the
MP tray.
When loading thick or extra thick paper, you should make paper settings as shown below:
❏ Duplex printing is not available for extra thick paper.
❏ Make settings on the Basic Settings in the printer driver.
Paper Size:
Paper Source:
Paper Type:
❏ You can also make these settings on the Tray Menu in the control panel. See "Tray
Menu" on page 172.
User's Guide
A4 or LT
MP Tray (up to 15 mm thick stack)
Labels
A4, A5, B5, LT, HLT, EXE, GLT
MP Tray (up to 15 mm thick stack)
Thick, Thick (Back), or Extra Thick
44
Paper Handling