Epson AcuLaser C3800N Series User Manual page 16

EPSON AcuLaser C3800
❏ Connect your printer to an electrical outlet that meets the power requirements of this
printer. Your printer's power requirements are indicated on a label attached to the
printer. If you are not sure of the power supply specifications in your area, contact your
local power company or consult your dealer.
❏ If you are unable to insert the AC plug into the electrical outlet, contact an electrician.
❏ Avoid using outlets that other appliances are plugged into.
❏ Use the type of power source indicated on the label. If you are not sure of the type of
power available, consult your dealer or local power company.
❏ If you are unable to insert the plug into the outlet, contact a qualified electrician.
❏ When connecting this product to a computer or other device with a cable, ensure the
correct orientation of the connectors. Each connector has only one correct orientation.
Inserting a connector in the wrong orientation may damage both devices connected by
the cable.
❏ If you use an extension cord, make sure that the total of the ampere ratings on the
products plugged into the extension cord does not exceed the extension cord ampere
rating.
❏ Unplug this printer from the wall outlet and refer servicing to a qualified service
representative under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into it.
C. If it has been exposed to rain or water.
D. If it does not operate normally when the operating instructions are followed. Adjust only
those controls that are covered by the operating instructions since improper adjustment
of other controls may result in damage and will often require extensive work by a qualified
technician to restore the product to normal operation.
E. If it has been dropped or the cabinet has been damaged.
F. If it exhibits a distinct change in performance, indicating a need for service.
User's Guide
16
Safety Instructions