Using The Reserve Job Function - Epson AcuLaser C3800N Series User Manual

EPSON AcuLaser C3800

Using the Reserve Job Function

The Reserve Job function allows you to store print jobs on the printer's memory and to print
them later directly from the printer's control panel. Follow the instructions in this section to
use the Reserve Job function.
Note:
You need to keep sufficient RAM disk capacity in order to use the Reserve Job function. To enable
RAM disk, you have to set the RAM Disk setting on the control panel to Normal or Maximum. We
recommend installing an optional memory to use this function. For instructions about increasing
your printer's memory, see "Installing a memory module" on page 220.
The table below gives an overview of the Reserve Job options. Each option is described in
detail later in this section.
Reserve Job Option
Re-Print Job
Verify Job
Confidential Job
Jobs stored on the printer's memory are handled differently depending on the Reserve Job
option. Refer to the tables below for details.
Reserve Job
Option
Re-Print Job +
Verify Job
Confidential Job
Reserve Job
Option
Re-Print Job
Verify Job
Confidential Job
User's Guide
Description
Lets you print the job now and store it for later reprinting.
Lets you print one copy now to verify the content before printing
multiple copies.
Lets you apply a password to the print job and save it for later printing.
Maximum Number
of Jobs
64 (combined total)
64
After Printing
Data remains on
the printer's
memory
Data is cleared
When Maximum is
Exceeded
Oldest job
automatically
replaced with newest
Delete old jobs
manually
After Turning Off Printer or Using Reset All
Data is cleared
Using the Printer Software with Macintosh
When RAM Disk is Full
Oldest job automatically
replaced with newest
Delete old jobs manually
133