The Printer Does Not Print Normally Via The Usb Interface; The Printer Does Not Print Normally Via The Network Interface - Epson AcuLaser C3800N Series User Manual

EPSON AcuLaser C3800

The printer does not print normally via the USB interface

Cause
For Windows users only
The Data Format setting in the printer's
Properties is not set to ASCII or TBCP.
For Macintosh users only
The Data Format setting in the printer's
Properties is not set to ASCII.

The printer does not print normally via the network interface

Cause
The Data Format setting is different from the
data format setting specified in the
application (except on Mac OS X)
For Windows users only
The computer is connected to the network
using AppleTalk in a Windows 2000
environment, and the Send CTRL+D Before
Each Job or Send CTRL+D After Each Job
setting on the Device Settings sheet of the
printer's Properties dialog box is set to Yes.
For Windows users only
The print data is too large.
User's Guide
What to do
The printer cannot print binary data when it is
connected to the computer via the USB interface.
Make sure that the Data Format setting, which is
accessed by clicking Advanced on the PostScript
sheet of the printer's Properties, is set to ASCII or
TBCP.
If your computer is running Windows XP, XP x64, click
the Device Settings tab in the printer's Properties,
then click the Output Protocol setting and select
ASCII or TBCP.
The printer cannot print binary data when it is
connected to the computer via the USB interface.
Make sure that the Data Format setting, which is
accessed by clicking Print from the File menu, is set to
ASCII.
What to do
If the file is created in an application that allows you
to change the data format or encoding, such as
Photoshop, make sure that the setting in the
application matches that in the printer driver.
Make sure that both the Send CTRL+D Before Each
Job and Send CTRL+D After Each Job settings are set
to No.
Click Advanced on the PostScript sheet of the
printer's Properties, then change the Data Format
setting from ASCII data (default) to TBCP (Tagged
binary communications protocol).
When the Binary setting is set to On, TBCP is not
available. Use the Binary protocol. See "PS3 Menu" on
page 184 for details.
279
Troubleshooting