Accessing The Postscript Printer Driver - Epson AcuLaser C3800N Series User Manual

EPSON AcuLaser C3800
For Windows Me or 98 users
1. Install the EpsonNet Print. Refer to "Installing EpsonNet Print" in the Network Guide to
find the instructions.
2. Install the printer driver. See "Installing the PostScript printer driver for the USB
interface" on page 152 for details.
3. Set the printer port to EpsonNet Print Port. Refer to "Configuring the Printer Port" in
the Network Guide to find the instructions.
Note:
High-speed Printing (RAW) is not supported.

Accessing the PostScript printer driver

You can access the PostScript printer driver directly from any application programs, from
your Windows operating system.
The printer settings made from many Windows applications override the setting made
when the printer driver is accessed from the operating system, so you should access the
printer driver from your application to make sure that you get the result you want.
From the application
To access the printer driver, click the Print or Page Setup from the File menu. You also
need to click Setup, Options, Properties, or a combination of these buttons.
For Windows XP or XP x64 users
To access the printer driver, click Start, click Printers and Faxes, then click Printers.
Right-click your printer icon, then click Printing Preferences.
For Windows Me or 98 users
To access the printer driver, click Start, point to Settings, then click Printers. Right-click
your printer icon, then click Properties.
For Windows 2000 users
To access the printer driver, click Start, point to Settings, then click Printers. Right-click
your printer icon, then click Printing Preferences.
User's Guide
Using the PostScript Printer Driver
155