Table of Contents
Advertisement
EPSON AcuLaser C3800
2. Load a stack of the desired paper with the printable surface down, then slide the guides
against the sides of the stack to get a snug fit.
Note:
❏ When loading the paper, insert the short edge first.
❏ Do not load paper that exceeds the maximum stack height.
❏ Straighten the paper before loading it. If curled paper is loaded, it may not feed correctly.
❏ After loading paper, set the MP Tray Size / MP Type settings to match the loaded paper size
on the control panel.
❏ To print on the back side of previously printed paper, use the MP tray. The duplex printing
cannot be used for this purpose.
Standard lower paper cassette and optional paper cassette unit
The paper sizes and types supported by the optional paper cassette unit are the same as
the standard lower cassette unit. For more information, see "550-sheet Paper Cassette
Unit" on page 33.
The paper-loading procedure is the same for the standard lower cassette and the optional
paper cassette unit.
In addition to plain paper, you can also use special media such as EPSON Color Laser
Paper in the paper cassettes.
Follow these steps to load paper into the standard and optional paper cassette units. The
illustrations show the standard lower cassette.
User's Guide
36
Paper Handling
Advertisement
Table of Contents
