Graphics Do Not Print Correctly; Printouts Are Extremely Curled - Epson AcuLaser MX20DN series User Manual

Cause
The MP Tray Size setting may be incorrect.
The size of the loaded paper is incorrect.

Graphics do not print correctly

Cause
The printer emulation setting in your application may be
incorrect.
You may need more memory.

Printouts are extremely curled

Cause
The printouts are curled because of heat and pressure of
the fuser unit.
Epson AcuLaser MX21/MX20 Series
What to do
Make sure the correct paper size is set on the MP Tray Size
setting in the Tray Menu on the control panel.
MP tray:
Make sure that the size of paper loaded in the MP tray matches the
MP Tray Size setting in the Tray Menu. See "MP tray" on page
33.
Paper cassette:
Make sure that the size of paper loaded in the paper cassette
matches the Cassette1 Size, Cassette2 Size, or Cassette3
Size setting in the Tray Menu and the positions of the paper
guides are correct. See "Standard paper cassette" on page 37.
What to do
Make sure that your application is set for the printer emulation
you are using. For example, if you are using the ESC/Page mode,
make sure that your application is set to use an ESC/Page printer.
Graphics require large amounts of memory. Install an appropriate
memory module. See "Memory Module" on page 190.
What to do
Turn the paper over or load a different type of paper.
User's Guide
Troubleshooting 229