The stored job is deleted.
Receiving Faxes
About the reception mode
You can select from four reception modes for receiving a call with this printer.
To change the modes, press the Setting button and specify the Incoming Mode setting of Reception
Settings in Fax Settings. For details, see "Fax Settings" on page 163.
Setting item
Auto Switching (Default)
Fax Only
Phone Only
TAM
Basics of receiving faxes (automatic receiving)
When the printer receives a fax, the data is stored in the memory and printed automatically.
Note:
You cannot receive a fax under the following conditions.
❏ When you are scanning originals.
❏ When you are sending fax document from a computer.
Description
When a call is received, the printer automatically answers after a certain duration
specified by the Ext. Phone Timeout settings.
Note that the external telephone rings during the specified duration if it is attached to
the printer.
The printer automatically answers and receives the fax. When external telephone is
attached, it rings at least one time.
When a call is received, the attached phone rings.
The printer never automatically answers.
When an external telephone detects a fax/phone signal while answering an incoming
call, the printer automatically receives the fax.
Epson AcuLaser MX21/MX20 Series
Faxing (DNF Model Only)
User's Guide
128