Epson AcuLaser MX20DN series User Manual page 76

Scanning in Professional Mode using the document table
1. Place your original(s) on the document table. See "Setting Your Originals" on page 47 for
instructions.
2. Start Epson Scan. See "Starting Epson Scan" on page 68 for instructions.
3. Select Professional Mode in the Mode list. See "Changing the scan mode" on page 69 for
instructions.
4. Click the arrow to open the Document Type list and select Reflective.
5. Click the arrow to open the Document Source list and select Document Table.
6. Click the arrow to open the Auto Exposure Type list and select Document or Photo.
7. Click the arrow to open the Image Type list and select the detailed image type you are scanning.
Image Type setting
24-bit Color
Color Smoothing
8-bit Grayscale
Black & White
Note:
If you select 8-bit Grayscale or Black & White, you can also select an Image Option setting, as
described below.
Image Option Setting
None
Dropout: Red
Dropout: Green
Dropout: Blue
Color Enhance: Red
Color Enhance: Green
Color Enhance: Blue
Type of image you are scanning
Color photos
Color graphics, such as a chart or graph
Black-and-white photos with just a few shades of gray
Documents with black text and/or line art
Description
No Image Option setting is applied.
Dropouts red in the scan.
Dropouts green in the scan.
Dropouts blue in the scan.
Enhances red in the scan.
Enhances green in the scan.
Enhances blue in the scan.
Epson AcuLaser MX21/MX20 Series User's Guide
Scanning 76