Epson AcuLaser MX20DN series User Manual page 139

2. Make the desired setting.
3. Press the Setting button on the control panel.
4. Press the u or d button several times to select Copy Settings, Scan Settings, or Fax
Settings, and then press the OK button.
5. Press the u or d button several times to select Standard Copy Settings, Standard Scan
Settings, or Standard Fax Settings, and then press the OK button.
6. Press the F3 button to select Yes.
The menu is registered as a standard menu.
Registering and calling the job memory
You can register frequently used settings for Copy mode and Scan mode as job memories. The
registered settings can be called up when copying or scanning.
Registering a job memory
1. Press the Copy or Scan button on the control panel.
2. Make the desired setting.
3. Press the Job Memory button on the control panel.
4. Press the u or d button several times to select a job memory.
5. Press the F2 button to select Register.
Note:
To delete the registered settings in the job memory, press the F2 button.
6. Press the F2 button to select Yes.
The settings are registered in a job memory.
7. Press the F4 button to exit the menu.
Epson AcuLaser MX21/MX20 Series
Using the Control Panel
User's Guide
139