Battery Charging And Life - netAlly LinkRunner AT 1000 User Manual

Shows the Home screen.
O
: Clears the current measurement data.
P
: Saves the current measurements data into a report file, which
can be transferred to the LinkRunner Manager PC application.
NOTE: If you are using Link-Live Cloud Service, results are
automatically uploaded, and you do not need to save report
files manually. See "Link-Live Cloud Service," page 11.
Navigation keys. The outer ring of keys (four) perform the left/right
and up/down screen navigation.
Connector for the AC adapter.
USB port for connection to a PC.
Kensington lock slot.
Screw for the battery pack.
The LED turns on when you connect the AC adapter. The LED is red
when the battery is charging and green when the battery is fully
charged.

Battery Charging and Life

LinkRunner AT 1000 model includes a AA battery pack.
LinkRunner AT 2000 model includes a rechargeable Lithiumion
battery pack.
Additional AA and Li-ion battery packs are available separately.
To charge the Li-ion battery, connect the AC adapter to the battery
connector (see Figure 1 number ). You can use the tester while you
charge the battery.
When the tester is off, the battery charges in approximately 3 hours.
The Li-ion battery life is approximately 6 hours during typical
operation. The AA battery life is approximately 3 hours.
An icon in the upper-left corner of the screen shows the battery
status .
NOTE: Do not leave the Li-ion battery pack in high
temperatures, such as in a car on a sunny day.
The Li-ion battery will not charge if the internal temperature
of the tester is above 113ºF (45ºC).
Physical Features
7