Table of Contents
Advertisement
VLAN/MAC/Proxy Configuration
Select Tools > VLAN/MAC/Proxy Configuration.
Figure 6. VLAN/MAC/Proxy Configuration Screen
This screen allows you to enable and enter the VLAN ID and its
Priority level. Un-check the VLAN check box to disable the VLAN
capability.
You can also enable and enter a user defined MAC address. Un-check
the Enable User Defined MAC check box to revert the LinkRunner AT
back to the factory default MAC address.
At no other time does the LR-AT connect to the network using IP
addressing. This applies to the Switch and Cable test screens.
This screen also contains Proxy settings.
NOTE: To access the Proxy Configuration, your LinkRunner AT
must have firmware version 2.5.3 or later, which also requires
you to download and update
LinkRunner Manager software to version 1.0.9.1112.
To configure with your network's Proxy settings:
1
Select Address, enter your proxy server address, and save (F2).
2
Select Port, enter your proxy server port number, and save (F2).
3
If required, select User, enter your User ID, and save (F2).
4
If required, select Password, enter your proxy password, and
save (F2).
LinkRunner AT can now be claimed and then send test results to
Live.com
via the configured proxy server.
Setting Up the Tester
Link-
17
Advertisement
Table of Contents
