netAlly LinkRunner AT Quick Start Manual

LinkRunner
Network Auto-Tester
Quick Start Guide
The LinkRunner AT is a portable device that
allows networking professionals to easily verify
network availability and copper and fiber cable
connectivity, identify networks and ports, and
generate reports. LinkRunner AT 2000 can act as
a packet reflector for performance tests run by
other NetAlly testers.
Link-Live Cloud Service
AT
™
system for collecting, organizing, and reporting
your connection test results, which are
automatically uploaded once your LinkRunner AT
is claimed and configured.
LinkRunner Manager
application for locally updating your software,
creating profiles, storing results, and generating
reports. You can download LinkRunner Manager
from
LinkRunner AT's key features include:
Your LinkRunner AT is now ready to perform tests
on your network and display results.
NetAlly.com/products/LinkRunner
• Multiple user-configured AutoTests.
• TruePower™ Power over Ethernet (PoE) testing
up to 30 W with LinkRunner AT 2000.
• Ethernet speed and duplex verification at 10/100
Gigabit rates.
• Twisted pair and fiber optic link identification.
• Cable length measurement, fault location, fault
type detection, and wiremap verification.
• Nearest switch identification with port number,
VLAN, and IP subnet provisioned.
• DHCP, DNS, and Gateway connectivity tests.
• Ping and TCP port connectivity tests with up to
10 user-selected targets.
Get the complete LinkRunner AT Network
Auto-Tester User Manual at NetAlly.com/
products/LinkRunner.
1
Power Up and Connect
Charge the internal battery by plugging the
a)
included power supply into the charging port.
The battery will fully charge in 3 hours.
Press the power button to start up the unit.
b)
Connect your LinkRunner AT to an active
c)
Internet connection using the Ethernet port.
2
Sign Up/Sign In
To get started with Link-Live, create a user
a)
account at Link-Live.com.
is a free, online
is a Windows PC
.