Saving A Report - netAlly LinkRunner AT 1000 User Manual

Figure 27. Fiber Connected Switch Results
S R
XII. AVING A EPORT
You can save the current measurement data the tester has collected
into a report that can be viewed and printed through the LinkRunner
Manager PC application. This information includes:
•
AutoTest results
•
Switch results
•
Cable test results
The LR-AT 1000 model can save up to 10 reports. The LR-AT
2000 model can save up to 50 reports.
Link-Live Cloud Service automatically uploads the results from
AutoTest only.
To save the measurement data collected on the tester:
P
1 Press . The tester shows a default filename at the bottom of
the screen.
Note
• To save the data with the filename shown, press
The tester saves the data into a report file.
• To overwrite a report that is saved on the tester, highlight
L
the report, press , press
• To change the filename, press
Note
Report names can have a maximum of 12 characters. The
extension LRS is appended when the file is saved to your PC
through the LinkRunner Manager PC application.
• To delete characters in the filename, press
• To add characters to the filename, use
a character, then press
• To move the cursor in the filename, highlight the filename,
then press .
Save.

Saving a Report

Save, then press OK.
Edit.
Backspace.
to highlight
L
.
32