Using The Poe Feature - netAlly LinkRunner AT 1000 User Manual

Figure 18. Cable Test Results
U P
IX. SING THE
Power over Ethernet (PoE) is disabled by default. To enable
PoE, select Tools > PoE Configuration, and check Enable PoE. Select
the Power Sourcing Equipment (PSE) class to verify.
If the LinkRunner AT is a 2000 model, you also have the option of
enabling TruePower™. TruePower applies a load equivalent to the
selected class to mimic a Powered Device (PD). See Figures 19 and
20.
E F
O EATURE
Figure 19. PoE Configuration on LR-AT model 1000
Figure 20. PoE Configuration on LR-AT model 2000

Using the PoE Feature

27