Setting Up The Tester; Ip Configuration - netAlly LinkRunner AT 1000 User Manual

Setting Up the Tester

S U T
VI. ETTING P THE ESTER

IP Configuration

To change settings on the tester, select Tools from the home screen.
Select Tools > IP Configuration.
Figure 4. Tools Menu Figure 5. IP Configuration Screen
This screen allows you to enter an IPv4 address or use a DHCP
address (default). It also allows you to enable IPv6 addressing (2000
model only). LR-AT uses the IP address during AutoTest. During
AutoTest, the LR-AT is required to connect to the network for Ping
and TCP Connectivity testing.
16