Table of Contents
Advertisement
Quick Links
Pandora Professional v3 is a car security-service system built for cars with on-board voltage of
12V. It is a complex engineering device, which includes unique and modern technological software and
hardware solutions.
While developing the Pandora Professional v3 we were using the most up-to-date electronics from
world's best manufacturers. The device is built using high-precision mounting and control machinery;
thus, we guarantee highest possible quality, reliability and stable technical characteristics for the whole
operation period.
The system has a cryptographically strong authorization code with unique dialog algorithm and
individual encryption key on every device. It guarantees protection form electronic hacking for the
whole operation period.
The system is built for your convenience: it's ergonomic, reliable, has the highest security and service
characteristics, 3 years unconditional warranty and free service and support. We are happy to provide
any support we can - feel free to use our online support.
!
WARNING! I
'
t
s stRoNGly RecommeNded to INstAll A secuRIty system by the skIlled AutomotIve techNIcIAN
t
he INstAllAtIoN must be peRfoRmed AccoRdING to the pRovIded techNIcAl documeNtAtIoN
. t
ANd schemes
he fuNctIoNAlIty ANd feAtuRes of the system depeNd oN Its coRRect INstAllAtIoN
/
ANd
oR the specIfIcs of the vehIcle
This device has limited external factors resistance. It should be operated in a temperature outside from -400C to +850C range. All system
components must be installed only in a car interior. The base unit and remote controls are fulfilled with the IP40 category of protection
against water.
Our web-site: pandorainfo.com
Customer support: support@pandorainfo.com
for choosing our security-service system
.
Product is in conformity with Electromagnetic Compatibility
Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC
Pandora would like to thank you
Pandora Professional v3
!
,
INstAllAtIoN GuIdes
/
coNfIGuRAtIoN
Advertisement
Table of Contents
Related Manuals for Pandora Professional v3
Summary of Contents for Pandora Professional v3
- Page 1 Pandora Professional v3 Pandora Professional v3 is a car security-service system built for cars with on-board voltage of 12V. It is a complex engineering device, which includes unique and modern technological software and hardware solutions.
-
Page 2: Table Of Contents
Table of contents General information Control over the system by phone System set Changing settings via a phone Read before using PIN-codes of the system Online service and mobile application Owner’s personal card Registration External VALET button Login System modules layout Adding a system to your account Base unit Writing a mobile device to the system memory... -
Page 3: General Information
System set 1. User manual 2. Owner’s personal card 3. Remote control 4. Immobiliser tag 5. External VALET button 6. Beeper 7. Base unit 8. RMD cable 9. Piezo siren 10. Main cable of the base unit General 11. Blocking relay Moto 12. -
Page 4: Read Before Using
Read before using PIN-codes of the system Carefully read this manual before starting installation and using the security-service system. Pay pin- T is recommended ThaT you will wriTe down The changed or creaTed values of all codes liminaTe Third parTy attention to text marked with access To This informaTion he securiTy... -
Page 5: External Valet Button
Built-in LTE module (4G LTE/3G/2G | GPS/GLONASS) - provides a connection with our online indicator is placed inside a vehicle (see the “System modules layout” service pandora-on.com and mobile application, allows to control the system by a phone using DTMF section). The button is used for programming the system, arming/ commands, voice and SMS notifications, LBS-coordinates (only by DTMF -command), automatic date disarming, activating/deactivating Immobiliser mode. -
Page 6: Information Signals Of The System
Information signals of the system SOUND / AND LIGHT SIGNALIZATION SIGNALS DESCRIPTION LIGHT SIGNALS OF THE LED INDICATOR Arming 1х /1х SIGNALS DESCRIPTION Disarming 2х /2х THE SYSTEM IS ARMED Vehicle search 5х /5х Short red flashes System is armed Alarm - alarm level of a sensor is triggered, 30 sec. -
Page 7: System Functions And Modes
Security mode The system confirms arming with 1х sound 1х light signals. When the system is armed, the system monitors security zones with separated warning and alarm level of triggering: • Warning mode - this mode activates when there is a slight impact on the shock sensor or additional senor. -
Page 8: Controlled And Security Zones
Controlled and security zones When using the remote and automatic engine start functions, make sure that a car is secured with handbrake or some other means of fixating the car on a parking position. • Interior temperature (status) Remote and automatic engine start on automatic transmission cars will only occur, if a transmission •... -
Page 9: Slave Mode
Slave mode Anti-Hi-Jack 1/2 modes The Anti-Hi-Jack modes help to prevent aggressive seizure of a vehicle in case of disappearance of This mode allows arming and disarming vehicle control elements - factory key fob, buttons/sensors of authorization devices from the radio coverage zone when system is disarmed. a keyless access entry system. -
Page 10: Immobiliser Tag
Beach mode This mode allows to use the pre-programmed «Beach mode PIN-code» for system arming/disarming. The code must be entered using factory vehicle controls (buttons/sensors) or additionally installed element. AN EXAMPLE OF USING BEACH MODE • Press the factory or additionally installed element until the single light flash, thereafter start to enter •... -
Page 11: Functions Of The Button
Indication of the SEND LED A radio tag is a device used to control a vehicle/system on a distance of a Bluetooth connection. The tag is also used as an authorization device for «Immobiliser/Anti-Hi-Jack/Hands Free» modes. The radio tag has: a control button for arming/disarming and activating/deactivating Service mode, a built-in SIGNALS DESCRIPTION... -
Page 12: Prompt Entry/Change Of The Main Owner Phone Number
Updating firmware of the tag Remote control Download the Pandora BT application (Android / iOS) or Pandora Specialist (Android) on the devices equipped with a Bluetooth 4.0 Low Energy or higher module. • Open the mobile app, find the system. -
Page 13: Switching On/Off Remote Control
Switching on/off the remote control A two-way remote control is a mean to control and display system and vehicle state. The remote control operates only when it is in the coverage zone of the system radio channel. All transmitted commands are reliably protected against electronic hacking with a modern dynamic dialogue encryption algorithm. -
Page 14: Diagnostic Mode
Quick access functions of the remote control To change the battery: • move aside the battery cover; • remove the battery from the battery compartment and, observing the polarity, insert a new one; System disarmed System armed • close the battery cover; (no alarm events) Ignition is switched on Ignition is switched off... -
Page 15: Icons Of The Remote Control
Icons of the remote control Remote control menu Connection status Shock sensor You can control and manage all main settings and parameters of the system using the menu of the Warning level remote control. Security mode Briefly press the button to enter the menu. The following presses of the button will switch status Shock sensor... - Page 16 PROCEED TO THE SETTINGS MENU CAR STATE (press briefly) To get information about engine temperature, interior temperature, battery voltage and fuel level, BACK select the CAR STATE menu by short presses of the button and briefly press the button. HISTORY 22 °...
- Page 17 AUTOSTART TRACKING AUTOMATIC ENGINE START SETTINGS TRACKING SETTINGS This menu allows configuring the automatic engine start and stop settings. A synchronized real This menu allows you to switch on and off the tracking function for online services. time clock in the remote control and the base unit and other autonomous system settings allow to SIREN OPTIONS OF THE SIREN SOUND SIGNALS implement set of conditions of engine start and operation regardless of whether the remote control is...
-
Page 18: Control Over The System By Phone
a remote control and a base unit. - disable notification signals. - enable notification by “Melody” ringtone. The notification will play once when system is armed. - enable notification by “ALARM” ringtone. The “ALARM” ringtone will be played if the system is armed. The system will notify you with a short signal one time per minute after the ringtone. - Page 19 DTMF commands or The correcT operaTion of The funcTions an owner should moniTor The sTaTus balance of The card , gsm For example: To have simple access to the engine start function, create a new contact in the contact insTalled in The sysTem f The card is blocked or defecTive funcTions of The sysTem will be unavailable...
-
Page 20: Changing Settings Via A Phone
Enabling/disabling automatic engine starts 1. Call the system number and wait for the answer. 2. Dial the 666* DTMF command to block the engine or the 999* to unlock it (after dialling 999* you The system has a function of prompt disabling automatic engine start: 1. -
Page 21: Online Service And Mobile Application
Changing guest PIN-code Owner's main number -> «#» Phone number Additional settings settings Additional owner's number -> «#» Allow/deny entering as guest Second additional owner's Allow/deny command 666 number -> «#» Account balance inquiry Set threshold voltage for sending number -> «#» text message System's number ->... -
Page 22: Registration
Web-service: https://pandora-on.com. Registration» window, enter the data of a new system/device located on the Owner’s personal card. The Pandora Connect mobile app is available for downloading from the corresponding app store: App Store for iOS devices; rase The proTecTive layer carefully o noT use any sharp objecTs To avoid damaging of hidden informaTion under Google Play for Android devices. -
Page 23: Writing A Mobile Device To The System Memory
When approaching the vehicle or when Internet connection is missing a mobile phone with the mobile application Pandora Connect installed can work with the system via a Bluetooth connection. This type of connection allows you to control the system, receive status information and use your mobile phone as an authorization device. -
Page 24: Arming
1 Online service PANDORA-ON.COM second. Login to the PANDORA-ON.COM, when the system is online (there is an Internet connection) press the Radio tag button on the control panel. A radio tag must be in the Bluetooth coverage area. Shortly press the control button on the tag. -
Page 25: Unlocking The Trunk
Locking/unlocking doors when ignition is on Online service PANDORA-ON.COM Login to the PANDORA-ON.COM, when the system is online (there is an Internet connection) press the button on the control panel. The system allows you to lock and unlock doors when ignition is on. To do this, use one of the methods described below. -
Page 26: Delayed Arming
The mode sysTem execuTes conTrol commands This procedure can be repeated multiple times. Mobile application Pandora Connect • To stop the engine, press and hold the button for 2 seconds or more (the remote control must Open the mobile application. -
Page 27: Engine Preheater
Online service PANDORA-ON.COM Online service PANDORA-ON.COM • To start the engine, login to the PANDORA-ON.COM, when the system is online (there is an Internet connection) press the START ENGINE button on the control panel. In a few seconds the engine will For remote control of the engine preheater, login to the PANDORA-ON.COM, when the system is online... -
Page 28: Ultra-Low Power Consumption (Season Storage) Mode
Call the system number, wait for the answer: • to activate Service mode, dial the command and the “Secret PIN-code” from the Owner’s Mobile application Pandora Connect personal card; When the system is online (only Bluetooth connection), press and hold the “Stealth mode” button on •... -
Page 29: Control Over The System In Case Of Emergency
Service mode indication Управление режимом ТО при помощи кнопки иммобилайзера • Activated Service mode is indicated by: an icon in the mobile application, constant green LED when • Для включения режима ТО после ввода «ПИН-код иммобилайзера» в течение 20 секунд нажми- the ignition is on, long sound signal of a Beeper at the moment you activate the mode. - Page 30 Owner’s personal card External VALET button efore using emergency sysTem conTrol check The sysTem and vehicle conTrol devices check a baTTery Turn on a device in accordance wiTh iTs manual if required valeT emove The proTecTive layer carefully o noT he exTernal buTTon is placed in The inTerior f all devices are working...
-
Page 31: Emergency Disarming/Beach Mode
• Enter the fourth digit • Press the button the number of times equal to the fourth digit. Pauses OPTION №2 – EMERGENCY DEACTIVATION OF ANTI-THEFT FUNCTIONS between presses should not exceed 1 second. Each pressing will be confirmed with an orange LED This method is used for a permanent deactivation of the anti-theft functions. -
Page 32: Additional Devices
Remote control D-035 is a two-way short-distance communication device designed to control a security system and receive information about its state. The remote control can be used as an owner authorization device. CONTROL: Arming/Disarming | Trunk | Service mode | Remote engine start | Ignition Hold on STATUSES: System and vehicle status OWNER AUTHORIZATION: Immobilizer | Anti-Hi-Jack | Hands Free... -
Page 33: Warranty Obligations
Blocking radio relay BTR-101 is a wireless device designed to perform blocking engine blocking based or not based on car movement. 2.4gh (ble 4.2) r (nc) | adio inTerface uilT in blocking relay | ip54 oTion sensor Radio module RHM-03 BT is a wireless device designed to control equipment of the engine compartment: •... -
Page 34: Installation Certificate
Security system specification: Warranty period is 3 years since the moment of purchase, but no more than 3.5 (three and a half) years Model Pandora Professional v3 since the moment of production. This warranty does not include batteries of the remotes, as they have their own service lifetime. -
Page 35: Acceptance Certificate
Acceptance certificate Model Pandora Professional v3 is in conformity with Electromagnetic Compatibility Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC. Serial number ______________________________ Date of production__________________________ Responsible person’s signature (stamp) Packager_____________________________________________________________________________ Signature (personal stamp) Warranty card Model Pandora Professional v3 Serial number _______________________________________________________________________ Date of purchase «____»...