Writing A Mobile Device To The System Memory; Control Over The System - Pandora Professional v3 Manual

Table of Contents

Advertisement

Writing a mobile device to the system memory

When approaching the vehicle or when Internet connection is missing a mobile phone with the
mobile application Pandora Connect installed can work with the system via a Bluetooth connection.
This type of connection allows you to control the system, receive status information and use your
mobile phone as an authorization device. After installing the mobile application pair your mobile
device with the system.
!
T
b
he sysTem supporTs
lueTooTh connecTion only wiTh one mobile device
I. ENTER THE PROGRAMMING MODE
Use the VALET button to enter the «Service PIN-code» (default value is 1-1-1-1). See the detailed
description of the procedure in the «Control over the system in case of emergency» section.
II. ENTER THE «PAIRING A MOBILE PHONE» PROGRAMMING LEVEL
After entering programming mode, press and hold the VALET button for 5 seconds (until the fifth
signal of the siren/beeper). The system will enter the «Pairing a mobile phone» programming level. The
LED indicator will light green, the system is ready for pairing.
!
T
he previously paired device will be erased from The sysTem memory afTer enTering The level
III. PAIR A MOBILE DEVICE
Enable the Bluetooth connection in the mobile device, enter the app settings, click «Bluetooth control»,
click «Not defined». In the search box, establish a connection with the detected system. The red and green
flashes of the «LED» indicator light and a single siren sound will confirm the pairing.
!
i
,
«pin
f There is no auTomaTic pairing
enable The
»
funcTions
seTTings and make The pairing procedure again
1-1-1
4
«s
pin-
». T
where
lasT digiTs are The
ervice
code
IV. EXIT PROGRAMMING MODE
Turn on the ignition and then turn off to exit programming mode.
44
.
.
»
«r
requesT for phone pairing
iTem in The
adio Tag and mobile device
. a
pin-
(d
mobile device will requesT a
code
efaulT value is
.
his seTTing should be made by a qualified Technician
PA N D O R A P R O F E S S I O N A L V 3
7
Control over
the system
0-0-1-
U S E R M A N UA L
45

Advertisement

Table of Contents
loading

Table of Contents