Table of Contents
Antenna Port...............................................................6
USB Port .....................................................................6
RF Setup Menu ..........................................................7
Smart Tune .................................................................7
Frequency .................................................................10
Tuning Groups ..........................................................10
Scan ..........................................................................10
Group Edit ...............................................................11
Vector Pairs .............................................................11
Pilot Bypass..............................................................11
TXInfo........................................................................11
Audio Level ..............................................................11
Test Tone ..................................................................12
Output Type .............................................................12
SmartNR ..................................................................12
Talkback ...................................................................12
Polarity .....................................................................12
IR & Keys Menu ..........................................................12
Send Frequency ......................................................12
Send All ....................................................................12
Get Frequency .........................................................12
Get All ......................................................................12
Group Sync ..............................................................12
Send Key .................................................................13
Settings Menu .............................................................13
Lock/Unlock ...........................................................13
Backlight .................................................................13
RX On/Off ...............................................................13
TX Batt Type ...........................................................13
TX Batt Timer..........................................................13
TX Batt Icon ............................................................13
AutoOn ....................................................................13
Locale .....................................................................13
Default ....................................................................14
About ......................................................................14
Rio Rancho, NM
Four Channel Digital Receiver
Diagnostics .................................................................18
Troubleshooting ..........................................................24
IMPORTANT WARNING
The DSR4 is a high current receiver
that should not be used in a slot-mount
camera without double checking
available current from the camera. Many,
if not most, slot mount cameras are
designed for lower current receivers and
are current limited/fuse protected. The
DSR4 draws nearly 700mA at 7VDC. DO
NOT drop it in the camera to "see what
happens." Consult with your camera
manufacturer FIRST before attempting
to use this receiver in-slot.
The DSR4 is intended for use in slot
devices which can supply enough current
safely and without damage to fuses or
poly-fused circuits.
Lectrosonics will not be responsible
for damages that may result from
using this receiver in a slot mount
that cannot supply adequate current.
3
Need help?
Do you have a question about the DSR4 and is the answer not in the manual?
Questions and answers