Removing An Mx480 As Mlc - Juniper MX480 Hardware Manual

3d universal edge router
Hide thumbs Also See for MX480:
Table of Contents

Advertisement

MX480 3D Universal Edge Router Hardware Guide

Removing an MX480 AS MLC

356
When you remove an Application Services Modular Line Card (AS MLC), the router
continues to function, although the modular cards (AS MXC and AS MSC) installed on
the AS MLC being removed no longer function.
Up to five AS MLCs can be installed horizontally in the front of the MX480 router. The
AS MLCs are hot-insertable and hot-removable. An empty AS MLC weighs 10.5 lb
(4.76 kg). A fully configured AS MLC can weigh up to 15.27 lb (6.93 kg). Be prepared to
accept its full weight.
To remove an AS MLC (see
Have ready a replacement AS MLC or an AS MLC blank panel and an antistatic mat
1.
for the AS MLC.
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
2.
ESD points on the chassis.
Use one of the following methods to take the AS MLC offline:
3.
Press and hold the AS MLC online/offline button. The green
button begins to blink. Hold the button down until the LED goes out. The
online/offline button for each AS MLC is located directly above it on the craft
interface.
Issue the following CLI command:
user@host>request chassis fpc slot slot-number offline
For more information about the command, see the
NOTE:
The slot number corresponds to the lowest numbered slot for
which the AS MLC is installed.
Simultaneously turn both the ejector handles counterclockwise to unseat the AS MLC.
4.
Grasp the handles, and slide the AS MLC straight out of the card cage halfway.
5.
Place one hand around the front of the AS MLC (the modular card housing) and the
6.
other hand under it to support it. Slide the AS MLC completely out of the chassis, and
place it on the antistatic mat or in the electrostatic bag.
CAUTION:
The weight of the AS MLC is concentrated in the back end. Be
prepared to accept the full weight—up to 15.27 lb (6.93 kg)—as you slide
the AS MLC out of the chassis.
Figure 153 on page
357):
OK
LED next to the
.
CLI Explorer
Copyright © 2017, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents