Character Pitch - Oki ML4410 User Manual

CHARACTER PITCH

Character Pitch
With the following commands, the size of printed characters can be
altered:
Character Pitch
Begin 10 CPI
Begin 12 CPI
Begin Condensed mode
Stop Condensed mode
The size of the condensed print depends on which pitch is selected at the
time the command to set the condensed mode is sent.
After DC2
(condensed mode off)
After ESC SI
(condensed mode on)
Note 1:
None of these commands cancel the double width
mode.
Note 2:
For certain applications it is necessary to know the
number of characters that fit in one line.
Expand characters (double width print) for one line only with the
following command.
Double width
Double width printing for one line only
Expand your characters to double height with the following command.
Double height
Start double height
End double height
50
Decimal
27 80
27 77
27 15 or 15
18
Selection Current pitch
17.1 CPI
20 CPI
10 CPI
12 CPI
Decimal
21 119 49
27 119 48
Hex ASCII
1B 50 ESC P
1B 4D ESC M
1B 0F or 0F ESC SI or SI
12 DC2
Resulting pitch
10 CPI
12 CPI
17.1 CPI
20 CPI
Decimal Hex.
27 14 1B 0E
Hex. ASCII
1B 77 31 ESC w 1
1B 77 30 ESC w 0
Comp
F
F
F
F
ASCII Comp.
ESC SO F
Comp.
F
F
User's Guide